Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

ADI方法求解完全跨声速非定常小扰动方程

本文修改了Whitlow的ADI格式,以便求解另一变形的完全跨声速小扰动方程。本文给出的NACA64A006和NACA0012翼型的非定常跨声速流动的计算结果与其它数值结果和实验结果的比较表明本文格式是合理的且便于实际应用的。     

高速低压差分信号（LVDS）器件应用设计方法研究

随着高速LVDS器件得到广泛应用，在高速信号使用LVDS传输时，信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量，因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此，文章深入探讨了高速电路的设计，总结出设计技巧。     

High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

我省高职高专院校图书馆现代技术应用情况调查

目的比较与探讨不同类型高职高专图书馆现代化技术应用情况方法采用自编问卷对部分高职高专图书馆进行调查结果高职高专图书馆情况差异较大二级学院、民办学院处于前列,新高职、高专、职工大学紧随其后,挂靠学院与普通中专正在崛起。     

基于超精密应用的高刚度高阻尼空气静压导轨研究

介绍了一种采用多孔质节流的新型空气静压导轨,其刚度可以达到400N/μm或者更高,具有这种刚度的空气静压导轨可以取代液体静压导轨,广泛应用于超精密机床中.     

气象卫星数字基带信号解码的两种方法

论述利用计算机对气象卫星数字基带信号解码的两种方法。方法一是在开环条件下对基带采样跟踪与智能判决。方法二是基于最优检测原理 ,在分相码 (Manchester码 )的解码中简化了正交积分锁相环 ,采用单积分器辅助计算机智能判断 ,对基带实现最优检测     

高速低压差分信号(LVDS)器件应用设计方法研究

随着高速LVDS器件得到广泛应用,在高速信号使用LVDS传输时,信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量,因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此,文章深入探讨了高速电路的设计,总结出设计技巧。     

阳极氧化铝模板法制备CoPt纳米管

采用电化学直流沉积,首次在氧化铝模板中成功制备出直径为50 nm的CoPt纳米管高度有序阵列。利用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射仪(XRD)以及振动样品磁强计(VSM)对样品的结构和磁学特性进行测试。分析表明,CoPt纳米管是以面心立方(fcc)结构存在。当外加磁场与纳米线平行时,CoPt合金纳米管的矫顽力达450 Oe,这种大面积制备的CoPt纳米管希望在超高密度信息磁存储上得到应用。     

双功能陶瓷膜生物反应器处理污水的实验研究

针对目前膜生物反应器运行过程中膜易污染的问题，研制了一种新型的双功能陶瓷膜生物反应器．该生物反应器的主要特点是采用一种具有双重功能的陶瓷膜作为生物反应器的主要元件，陶瓷膜可以交替地进行曝气和过滤，将膜的在线反冲清洗和生物反应器的供氧曝气结合在一起．考察了不同运行条件下该反应器对COD、氨氮的去除效果．对陶瓷膜的充氧能力进行了实验，测得小孔陶瓷膜、大孔陶瓷膜、砂型曝气头的氧传递系数分别为：0．2315min-1，0．1587min-1，0．0991min-1．